Hydrasep®, Inc. has developed a new line of separators specifically tailored to the needs of Biodiesel production. Our BD separators are specifically designed to separate glycerin from biodiesel and wash water from biodiesel in either continuous or batch modes. We customize to meet your specific process needs.
If your process is continuous, if you use high shear reactors, or if you want to upgrade your batch process to sequence batching, we can assist you. If you want to double your production without doubling the size of your plant, we can assist you. Depending on your process, a Hydrasep® will handle two or more sequenced batch reactors, thus operating in a continuous mode.
We offer carbon steel or stainless steel construction for atmospheric, blanketed, pressure or vacuum operation. Thermal insulation and heaters can also be provided.
Whether you want to
we have a system tailored to best suit your needs.
A Hydrasep® separator can be used to replace slow, bulky and heat consuming decanters. The separation process becomes continuous, saving time, valuable real estate and energy. The Hydrasep® has no moving parts, no replaceable parts and does not consume any power. Unlike a centrifuge, it requires no power input and is virtually maintenance free.
Save time and heat over lengthy batch decanting. Save capital and operating cost, power consumption and maintenance on centrifuges.
The descriptions below will help guide you towards selecting the product best suited for your application.
For glycerin/methyl ester separation, washwater or water/acid-esterified feedstock separation, consider our BD product line.
For waste vegetable oil (WVO), yellow or brown grease pre-treatment with water ratio less than 50%, consider our RCT/DNAPL product line.
For biodiesel recovery from washwater, or yellow or brown grease pre-treatment with water ratio larger than 50%, consider our RCTOC product line.