Hydrasep® RCT DNAPL Model Separators

Oil Water Separator

RCT DNAPL models are specifically designed for the treatment of process water or groundwater where the oils and other contaminants are heavier than water or for the removal of water & solids upon vegetable or petroleum based oils.

Hydrasep RCT DNAPL Model Separator Data Chart

Looking for technical info? View the data chart to see how the Hydrasep RCT DNAPL model fits your needs.
Model #
RCT DNAPL		 Volume Length* Width♠ Height♥ Pipe Diameter Pipe Elevation♣ Oil Storage
Capacity		 Flow Rate
Inlet Outlet Inlet Outlet Rated Max Interm.† Cont.‡
(Gal.) (ft.) (in.) (in.) (in.) (in.) (in.) (in.) (Gal.) (Gal.) (gpm) (gpm)
HS-370-RCT DNAPL 611 9 36 36 2 1/2 2 1/2 28 24 141 172 30 12
HS-630-RCT DNAPL 1,142 10 48 48 3 3 36 32 249 320 45 20
HS-1000-RCT DNAPL 1,415 12 48 48 4 4 35 33 304 473 81 33
HS-2000-RCT DNAPL 2,247 17.83 45 60 6 6 45 42 446 1,070 171 69
HS-3000-RCT DNAPL 2,950 19.75 48 60 6 6 51 48 622 1,107 235 94
HS-4000-RCT DNAPL 3,770 22.00 48 72 8 8 56 53 1,000 1,282 313 125
HS-5000-RCT DNAPL 5,274 23.83 60 72 8 8 59 57 1,125 1,750 406 162
HS-8000-RCT DNAPL 9,978 28.83 72 96 10 10 72 67 2,300 2,800 645 258

* From endwall to endwall
♣ From bottom of tank to pipe centerline
♥ Cover handles not included

† Intermittent: flow spikes or lower contaminate concentration.

‡ Continuous: continuous supply of contaminants from process.

Features

  • Easy Access
  • Low Maintenance
  • Sectional Covers
  • Solids Retention/Removal
  • No Moving or Replaceable Parts
  • No Coalescers or Meshes
  • Non-Clogging

Separator Options

All units can be equipped with the following standard options. Contact us for other options and/or sizes.

  • Special External/Internal Coatings
  • Stainless Steel/Poly Internals/Configurations
  • Pumps
  • Slurry Pumps
  • Insulation
  • Freeze Protection
  • Level Sensors
  • Automatic Controls
  • Sloped Bottom for Enhanced Sludge/Solids Removal

I wanted to compliment you and your company on the great product you have for Biodiesel/Glycerin or Biodiesel/Water separation. Since switching from a traditional decanter tank to your design we have seen a significant improvement in our bio-wash system. It has allowed us to increase the flow at which we do our water wash. It has also provided a much more defined phase separation and helped stop the loss of methyl-esters in our wash water as well as reduced the work load on our biodiesel dryer system. We look forward to implementing more of your separation tanks in our upcoming plant expansion.

Integrity Biofuels