RCT DNAPL models are specifically designed for the treatment of process water or groundwater where the oils and other contaminants are heavier than water or for the removal of water & solids upon vegetable or petroleum based oils.
Oil Water Separation Options
All units can be equipped with the following standard options. Contact us for other options and/or sizes.
- Special External/Internal Coatings
- Stainless Steel/Poly Internals/Configurations
- Slurry Pumps
- Freeze Protection
- Level Sensors
- Automatic Controls
- Sloped Bottom for Enhanced Sludge/Solids Removal
Oil Water Separator Features
- Easy Access
- Low Maintenance
- Sectional Covers
- Solids Retention/Removal
- No Moving or Replaceable Parts
- No Coalescers or Meshes
Technical Data Chart
Looking for technical info? View the data chart to see how the Hydrasep RCTOC model fits your needs.
|Volume||Length*||Width♠||Height♥||Pipe Diameter||Pipe Elevation♣||Oil Storage
|HS-370-RCT DNAPL||611||9||36||36||2 1/2||2 1/2||28||24||141||172||30||12|
From endwall to endwall
♣ From bottom of tank to pipe centerline
♥ Cover handles not included
† Intermittent: Gravity fed contaminated rain water, spills, spill washdowns or pumped flows of less than 5 minutes duration.
‡ Continuous: continuous supply of contaminants from process.
The Hydrasep RCT oil water separator models are mainly suitable for flows with low oil concentrations and extended ...
RCT Oil Water Separator
UG model separators are mainly suitable for underground installation in stormwater runoff applications.
HS models are mainly suitable: for process/pressure applications, where blanketing is required, where oil concentrations are high. ...
Mobile separators are ideal for temporary use such as during tank cleaning or spill response. During cleaning operations ...